Vehicles
39 not categorized PORSCHE BOXSTER REAR WINGCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.FSPOR964CFHB Product details: General Fitment911 1989-94
$350.00
Make a selection FSPOR996CBX Product details: dramatically improve mid/high end power by replacing the catalytic converters with a free-flowing x-pipe while adding aggressive sports car sound and throttle response; recommended for track and off-road use only. General Fitment911 GT3 2003-05911 1998-05
From $1,295.00
Make a selection FSPOR996GT3CBX Product details: General Fitment911 GT3 2003-05
$1,295.00
Make a selection FSPOR996SCUPS Product details: General Fitment911 1998-05
$1,895.00
Make a selection CPO011KP Ksport kontrol pro fully adjustable coilover kits provide the ultimate in suspension technology for your street or track car. 36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs. The dampening adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts also allow you a more direct feel for solid driver response. Camber adjustability is included on pillow ball top mounts that allow it for the ability to adjust camber from the actual coilover, instead of a separate camber kit. General Fitment911 TURBO/GT2 2001-05
$2,049.30
Make a selection FSPOR997SCUPB Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design. General Fitment911 2005-08
$2,612.45
Make a selection FT24076 Our 911 sanden kits offer many benefits over the original york compressor found on the early 911 and 930 up through 1983. The sanden uses a "wobble-plate" to move five smaller pistons as compared to the york that uses a crankshaft to move two large pistons. The sanden wobble-plate design requires less horse power to turn and is a better match for the condenser area. Our sanden kit uses less engine compartment space and less horse power to turn. You will notice it runs smoother and quieter and improves system efficiency. The sanden compressor and it's mounting bracket bolt directly to the original york sub-plate. You can purchase our sanden kits in four configurations to match your objectives and budget: from...(choose a part on the right to read more) General Fitment911 1978-83930 1975-77 911 1974-77
$735.98
Make a selection FSPOR997SCUPX50 Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design. General Fitment911 2005-08
$2,612.45
Make a selection FSPOR997SSCUPX50 Fabspeed's supercup exhaust system is a loud and aggressive performance exhaust system recommended for track use only; this replaces the restrictive factory mufflers with a free flowing resonated design. General Fitment911 2005-08
$2,693.25
Make a selection FVD11199300 Are your exhaust tips a little old and unappealing to look at? Update them with a more aggressive look. Made by dansk, from t304 stainless steel with a polished finish. 4.75 long x 3.35 high (120x85mm) to fill in the entire bumper cut out. Angle cut to complement the rear bumper. If you would like to update your exhaust tip clamps and hardware, please order the following: 2 qty. 92811124605 2 qty. 92811142700 4 qty. 90007425202 4 qty. FVD116929 2 qty. 99908405202 General Fitment911 1994-98
From $326.70
Make a selection FVD51296501S Please note: this wing will only work on turbo decklids. Does not fit 964 c2 or c4 rear deck lids.
$2,014.10
Make a selection FSPOR997SCX Fabspeed is one of the top fabricators of aftermarket parts. With the introduction of Porsches new production line model of the 997 Carrera it was short after that manufactures such as fabspeed to take this new model into unseen performance. The x-pipe sportcats is made from high quality t304 ss c.n.c. Mandrel bent tubing for maximum exhaust flow. General Fitment911 2005-08
From $2,295.00
Make a selection FVD51299102MM The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the downforce rs (991.1 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: ve...(choose a part on the right to read more)
$1,383.80
Make a selection FVD512997GT3RS 997 GT3 rear spoiler fits all 997 (not turbo) General Fitment911 GT3 2007-11911 2009-12 911 2005-08
From $3,174.70
Make a selection FSPOR997SSCUPB Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design. General Fitment911 2005-08
$2,612.45
Make a selection P206 Change your cars look with the addition of lamin-x taillight kits. available in smoked or charcoal, the thick durable coverings are extremely easy to apply to your vehicle in the precut kits. offering a smooth, glossy, and consistent color throughout, the lamin-x kits are much improved over the less then effective spray on kits. the precut kits have adhesive backs to fit on any flat or shaped surface with ease. the smoked and charcoal kits are tinted only 17 percent allowing 83 percent light passage through. this is a great alternative to bulky plastic light coverings. General Fitment911 2005-08
$67.49
Make a selection MIS200 The quick six mounting kit enables you to immediately bolt a six-cylinder engine into your 914-4, using the factory engine pods. the '73-76 bodies, however, do require the purchase of the early rubber engine mounts. The bulkhead mount is for the serious six conversion. Welded in by a competent mechanic, it allows you to eliminate the four cylinder mounting pods allowing more clearance for valve adjust, easy removal of the rear shift bar and most importantly shifts the center of weight further forward to the factory recommended position. Includes 930 engine mounts General Fitment914 1970-76
$690.00
Make a selection P97021005 Eisenmann's engineers are responsible for designing the OEM systems seen on Porsche and amg cars, and use this experience to design the best performance exhaust systems in the world. Eisenmann's performance exhausts are built by hand from start to finish to create an old world craftsmanship simply not available with other exhaust manufacturers. General FitmentPANAMERA 2010-14
$3,991.55
Make a selection P70170050050 Speedart fuses performance innovation with attractive aesthetics. Speedart constantly looks for ways to improve upon Porsche vehicles. Speedart attains their goal of fusing performance and aesthetics with the best materials available. After the exhaustive research and development process, speedart manufactures its components with great precision ensuring the highest quality possible. Speedart realizes that their customers expect outstanding quality and will only accept the best when it comes to customizing their Porsche. General FitmentPANAMERA 2010-14
$3,442.50
Make a selection P202 Change your cars look with the addition of lamin-x taillight kits. available in smoked or charcoal, the thick durable coverings are extremely easy to apply to your vehicle in the precut kits. offering a smooth, glossy, and consistent color throughout, the lamin-x kits are much improved over the less then effective spray on kits. the precut kits have adhesive backs to fit on any flat or shaped surface with ease. the smoked and charcoal kits are tinted only 17 percent allowing 83 percent light passage through. this is a great alternative to bulky plastic light coverings. General Fitment911 1965-69912 1965-69 911 1998-05
From $45.00
Make a selection PO0312202 Meisterschaft set out with one simple idea: to create exhaust products superior to all others, the pinnacle of performance and quality, and this is the result. Meisterschaft exhaust products boast a background of over ten years in development. Partners from around the world collaborated with the common goal of making the worlds finest exhaust systems out of the finest materials. Their experience, knowledge, insight, innovation, and design all reside within the meisterschaft brand. Simply put, there is nothing better available on the market. General FitmentCAYMAN 2006-08
$4,580.63
Make a selection FVD721T245 Tool to take off and install wing from rear spoiler (997 turbo). General Fitment911 TURBO/GT2 2001-05
$53.85
Make a selection PP996GT3WG If you find your Porsche 996 Carrera rear end is a little plain, then you might want to consider adding one of these precision Porsche GT3 style rear spoilers. A direct copy of the original GT3 spoiler, this composite fiberglass part gives you the same aerodynamic advantage of the GT3s downforce. It is a full replacement of your decklid and hydraulic speed actuated rear spoiler. To ensure you have no warning light on your dash, you will have to buy the GT3 spoiler wiring harness or deactivate it using a Porsche piwis or durametric tool. The GT3 style wing comes unpainted. They are a direct fit to your factory hinges and retain your intake snorkel as well as engine fan. This complete decklid and spoiler ships vi...(choose a part on the right to read more) General Fitment911 1998-05
$1,748.25
Make a selection TECHART991KIT In the sense of technology, ideal is understood as the focus on the essential. In the meaning of the arts, it is the objective of the sensual execution of esthetics and beauty. And generally speaking, it is nothing less than the quest for perfection. At techart, they've focused on the essential for 25 years. General Fitment911 2009-12
$12,494.25
Make a selection VORST991CFKIT The v-gt front spoiler is designed by our engineers with functionality at its core with its dual integrated brake duct cooling ducts and GT center splitter made of carbon fiber. The v-gt composite lightweight front spoiler replaces the factory black plastic unit and attaches to the oe front bumper utilizing original factory clips and mounting holes for a simple and clean install. Also available in dvwp (dry vacuum woven plastic) primered finish for paint. General Fitment911 2009-12
$7,553.25
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |